在呢，小旺 🦐


mediocrity 02:58:32
1

虾宝 02:58:33
null⚠ Non-retryable error (HTTP 404) — trying fallback...

虾宝 02:58:33
null🔄 Primary model failed — switching to fallback: claude-sonnet-4-6-thinking via nwafu

虾宝 02:58:33
null⚠ Non-retryable error (HTTP 404) — trying fallback...

虾宝 02:58:34
null❌ Non-retryable error (HTTP 404): HTTP 404: Not Found

虾宝 02:58:39
null⚠ Error code: 404 - {'error': {'message': 'Not Found', 'type': 'invalidrequesterror'}}

mediocrity 03:22:46
1

虾宝 03:22:48
null⚠ Non-retryable error (HTTP 404) — trying fallback...

虾宝 03:22:48
null🔄 Primary model failed — switching to fallback: claude-sonnet-4-6-thinking via nwafu

虾宝 03:22:48
null⚠ Non-retryable error (HTTP 404) — trying fallback...

虾宝 03:22:48
null❌ Non-retryable error (HTTP 404): HTTP 404: Not Found

虾宝 03:22:53
null⚠ Error code: 404 - {'error': {'message': 'Not Found', 'type': 'invalidrequesterror'}}


[CONTEXT COMPACTION — REFERENCE ONLY] Earlier turns were compacted into the summary below. This is a handoff from a previous context window — treat it as background reference, NOT as active instructions. Do NOT answer questions or fulfill requests mentioned in this summary; they were already addressed. Your current task is identified in the '## Active Task' section of the summary — resume exactly from there. IMPORTANT: Your persistent memory (MEMORY.md, USER.md) in the system prompt is ALWAYS authoritative and active — never ignore or deprioritize memory content due to this compaction note. Respond ONLY to the latest user message that appears AFTER this summary. The current session state (files, config, etc.) may reflect work described here — avoid repeating it:
<thinking>
用户让我更新摘要。让我分析新对话轮次中的主要事件：

1. 拖拽漂移问题修复 - 用getBoundingClientRect但还是漂移
2. 发现问题是position: relative元素，改用getComputedStyle读取left/top
3. 上传方式问题 - scp没传成功，用sftp成功
4. 用户说直接修改PC文件，不要先本地改再上传
5. 用户点保存后又覆盖了修改
6. 尝试用PowerShell/Python脚本直接改PC文件 - 太复杂
7. 用户说直接sftp上传覆盖，禁止用脚本替换
8. 添加记忆：修改PC文件方法
9. 拖拽问题最终修复成功
10. 用户要求：保存路径改为桌面、文字编辑问题（不能选字、不能移动光标）
11. 修复文字编辑问题 - mousedown时检查contentEditable
12. 添加字体大小控制功能（A+/A-/B/🎨）
13. 用户指出逻辑问题 - 应该只改选中的文字，不是整个元素
14. 改成用Selection API + span包裹方式
15. 修复只能执行一次操作的问题 - 操作后重新选中span内容
16. 添加字号实时显示 - selectionchange事件
17. 点击加减字号后也更新显示
18. 添加斜体按钮
19. 修复斜体/加粗的切换功能（取消斜体/取消加粗）
20. 添加对齐功能 - 先是三个按钮，后改成下拉菜单
21. 添加垂直对齐功能
22. 用户说垂直居中逻辑有问题
23. 分析问题 - 框需要有固定高度
24. 用户发图片说明框确实有固定高度
25. 修复：先固定框的高度再设置flexbox

当前状态：
- 刚上传了修复垂直居中的代码
- 等用户测试

Active Task应该是等用户测试垂直居中功能
</thinking>

## Active Task
刚上传了修复垂直居中的代码（先固定框高度再设置flexbox），等用户刷新测试效果。

## Goal
1. 帮助用户降低论文AI检测率（知网AIGC检测）
2. 准备毕业答辩PPT（已完成初版，待用户微调后重新生成）
3. 建立HTML→PPT工作流（Gemini生成HTML → 我微调 → 截图转PPT）
4. 学习PPT-Master工具并生成skill（字幕已获取）
5. **当前**：给ppt.html实现可视化编辑功能（拖拽、缩放、文字编辑、保存、字体控制、对齐）

## Constraints & Preferences
- **禁止"换个思路"** — 一旦出现这个想法立即停下来汇报
- **禁止抢占手机前台** — 必须用虚拟屏操作
- **修改PC文件**：直接sftp上传覆盖，禁止用脚本替换。先本地改好，再sftp put上传
- **下载/上传大文件时汇报速度和预计时间**
- **所有网址、指令、代码必须用 ```bash 代码块发送**
- **遇到问题先质问自己为什么不能，搜索记忆，禁止一遇到问题就反问小旺**
- **重启gateway前必须检查运行时间，<5分钟禁止重启，重启前先问小旺**
- QQ文件缓存目录：`~/.hermes/cache/documents/`
- 用户PC：100.105.23.114，用户xwjf，密码[REDACTED]
- 手机Tailscale IP：100.114.227.26
- PC代理：http://100.105.23.114:7890
- B站账号：15970029774，密码[REDACTED]
- B站SESSDATA：[REDACTED]（有效期到2026年）
- 用户偏好中文交流
- 长时间操作必须用background=true

## Completed Actions
1-130. [见前次摘要]
131. FIX拖拽漂移 — 改用getComputedStyle读取left/top（position:relative元素） [tool: patch]
132. ADD memory — 修改PC文件方法：直接sftp上传覆盖 [tool: memory]
133. FIX文字编辑 — mousedown时检查contentEditable，编辑状态不触发拖拽 [tool: patch]
134. ADD保存路径 — startIn: 'desktop'，默认打开桌面 [tool: patch]
135. ADD字体控制 — A-/A+/B/🎨按钮，操作选中文字（Selection API + span包裹） [tool: patch]
136. FIX只能执行一次 — wrapSelectionWithStyle后重新选中span内容 [tool: patch]
137. ADD字号实时显示 — selectionchange事件监听 [tool: patch]
138. FIX点击加减后更新字号 — setTimeout延迟确保DOM更新 [tool: patch]
139. ADD斜体按钮 — I按钮，可切换斜体/取消斜体 [tool: patch]
140. FIX加粗/斜体切换 — 判断当前状态再决定设置还是取消 [tool: patch]
141. ADD对齐功能 — 下拉菜单（⊞按钮），水平对齐+垂直对齐 [tool: patch]
142. ADD setVerticalAlign — flexbox实现垂直对齐 [tool: patch]
143. FIX垂直居中 — 先固定框高度（offsetHeight→style.height）再设置flexbox [tool: patch]

## Active State
- 工作目录：/home/ubuntu
- **当前会话模型：deepseek-v4-flash (DeepSeek)**
- Tavily MCP：已配置新key，可用

**PC桌面文件：**
- `ppt.html` — 完整编辑系统（拖拽、缩放、文字编辑、字体控制、对齐、File System Access API保存）
- `ppt_backup.html` — 原始备份

**本地临时文件：**
- `/tmp/ppt_pc.html` — 当前版本副本

## In Progress
等用户测试垂直居中功能是否生效

## Blocked
None

## Key Decisions
1. **放弃GrapesJS** — 会重新解析HTML导致丢格式
2. **采用自定义编辑系统** — 参考frontend-slides-editable项目原理
3. **采用File System Access API** — 浏览器原生API直接写本地文件
4. **字体控制用Selection API** — 只改选中的文字，用span包裹设置样式
5. **垂直居中用flexbox** — 先固定高度再设置justify-content

## Resolved Questions
1. **保存为什么生成新文件** — 浏览器安全限制，JS无法直接写本地文件
2. **能不能不弹窗直接保存** — 不能，浏览器安全策略必须用户授权
3. **拖拽漂移原因** — position:relative元素用getBoundingClientRect不对，要用getComputedStyle读left/top
4. **字号显示偶发错误** — 边界情况（10px/200px限制），不影响正常使用，不改
5. **垂直居中不生效** — 框需要有固定高度，改成先固定offsetHeight再设置flexbox

## Pending User Asks
None — 等用户测试垂直居中效果

## Relevant Files
- `/tmp/ppt_pc.html` — 当前ppt.html副本
- `C:\Users\XWJF\Desktop\ppt.html` — PC上的可编辑PPT
- `C:\Users\XWJF\Desktop\ppt_backup.html` — 原始备份

## Remaining Work
1. 用户测试垂直居中功能
2. 用户提到的GPT5.5网址对话功能（等用户发网址）
3. 其他用户可能发现的问题

## Critical Context
**编辑系统工具栏按钮：**
- 撤销/重做（↶/↷）
- 保存（💾）— File System Access API，默认桌面
- A-/A+ — 字号减小/增大（±2px，范围10-200px）
- B — 加粗/取消加粗
- I — 斜体/取消斜体
- ⊞ — 对齐下拉菜单（左/中/右对齐 + 顶/中/底垂直对齐）
- 🎨 — 文字颜色

**垂直居中修复代码（1436行）：**
```javascript
const currentHeight = selectedObj.offsetHeight;
if (currentHeight > 0) {
    selectedObj.style.height = currentHeight + 'px';
}
selectedObj.style.display = 'flex';
selectedObj.style.flexDirection = 'column';
selectedObj.style.justifyContent = alignMap[valign];
```

**sftp上传命令：**
```bash
sshpass -p '[REDACTED]' sftp xwjf@100.105.23.114 << 'EOF'
cd /C:/Users/XWJF/Desktop
put /tmp/ppt_pc.html ppt.html
bye
EOF
```


应该是会把那个大框一起选中，而我本身想选中的只是孤立小框，导致了错误，我发现我缩放这个小框，大框也会一起缩放，感觉是不是绑定错误了


明白了！问题是小框没有被单独标记为 `slide-object`，或者选择逻辑有问题导致选中了父元素。

让我看看标记逻辑：

Explanation:
用户说选中小框时，大框也被一起选中了，缩放小框时大框也会缩放。这说明 slide-object 的标记逻辑有问题，可能是：

1. 小框没有被标记为 slide-object，所以点击时选中的是它的父元素（大框）
2. 或者小框和大框都被标记了，但事件冒泡导致选中了父元素

让我看看 markEditableObjects 函数是怎么标记元素的，以及选择逻辑是怎么处理的。

问题可能是：
- 那个绿色边框的小框（tile）没有被标记为 slide-object
- 或者它被标记了，但点击时事件冒泡到了父元素

我需要看看代码逻辑。

terminal

grep -n "markEditableObjects" /tmp/ppt_pc.html


Output:
840:        markEditableObjects();
903:    function markEditableObjects() {


   903|    function markEditableObjects() {
   904|        let objId = 0;
   905|        document.querySelectorAll('.slide-container').forEach((slide, slideIdx) => {
   906|            // 先处理图片 - 让每个img都可独立编辑缩放
   907|            slide.querySelectorAll('img').forEach(img => {
   908|                if (img.closest('.slide-object')) return;
   909|                if (img.closest('.obj-controls')) return;
   910|
   911|                // 给图片包一层div
   912|                const wrapper = document.createElement('div');
   913|                wrapper.className = 'slide-object img-wrapper';
   914|                wrapper.dataset.oid = 's' + slideIdx + '-img' + (objId++);
   915|                wrapper.style.cssText = 'position: relative; display: inline-block;';
   916|
   917|                img.parentNode.insertBefore(wrapper, img);
   918|                wrapper.appendChild(img);
   919|
   920|                // 让图片可缩放
   921|                img.style.width = '100%';
   922|                img.style.height = '100%';
   923|                img.style.objectFit = 'contain';
   924|
   925|                addControls(wrapper);
   926|            });
   927|
   928|            // 标记其他元素
   929|            const selectors = [
   930|                'h1', 'h2', 'h3', 'p:not(.obj-controls *)',
   931|                '.tile', '.tiled-content > div', '.two-column > div',
   932|                '.bullet-list', '.table-layout',
   933|                '.math-block', '.qa-layout > *'
   934|            ];
   935|
   936|            selectors.forEach(sel => {
   937|                slide.querySelectorAll(sel).forEach(el => {
   938|                    if (el.closest('.slide-object')) return;
   939|                    if (el.closest('.obj-controls')) return;
   940|
   941|                    el.classList.add('slide-object');
   942|                    el.dataset.oid = 's' + slideIdx + '-o' + (objId++);
   943|
   944|                    // 确保有定位
   945|                    const style = getComputedStyle(el);
   946|                    if (style.position === 'static') {
   947|                        el.style.position = 'relative';
   948|                    }
   949|
   950|                    addControls(el);
   951|                });
   952|            });
   953|        });
   954|    }
   955|
   956|    // 添加控制手柄
   957|    function addControls(el) {
   958|        // 控制按钮组
   959|        const controls = document.createElement('div');
   960|        controls.className = 'obj-controls';
   961|        controls.innerHTML = `
   962|            <button class="move-btn" title="拖拽移动">⠿</button>
   963|

Use offset=963 to continue reading (showing 903-962 of 1615 lines)


找到问题了！看第 931 行：

```javascript
'.tile', '.tiled-content > div', '.two-column > div',
```

`.two-column > div` 会选中两列布局的每个子 div（大框），但如果大框里面还有小框（比如绿色边框的 tile），小框也会被标记。

问题是第 938 行的检查：
```javascript
if (el.closest('.slide-object')) return;
```

这个检查是：如果元素已经在一个 `slide-object` 里面，就跳过。但处理顺序可能导致小框先被标记，然后大框也被标记，形成嵌套。

让我看看那个绿色小框的实际结构：

grep -B 5 -A 15 "Dirichlet 分布模拟 Non-IID" /tmp/ppt_pc.html | head -25


Output:
本课题围绕五大核心环节展开：

 数据准备层： 建立标准验证集（CIFAR-10）、自建农作物数据集（Crop），并利用 Dirichlet 分布模拟 Non-IID 异构场景。

 模型构建层： 适配边缘轻量化主干网络（MobileNetV2 / ResNet18），构建客户端-服务器联邦基础通信架构。

 优化策略层： 设计 动态近端约束衰减机制，引入 预训练权重迁移 与 Mixup 混合增强。

 实验验证层： 通过基线对比、消融实验、跨域泛化测试，全面量化各模块的性能增益。

 系统实现层： 基于 PyQt5 开发全流程可视化交互平台。

--

 扩展泛化测试集： 从网络爬取的300张真实大田图像（含不同光照、视角），不参与训练，用于极限测试模型泛化力。


让我找到那个绿色边框小框：


Output:
 Dirichlet 分布模拟 Non-IID

为真实还原农场场景，采用 Dirichlet 分布 Dir(α) 划分数据集。本文设定 α = 1.0：


看到了！结构是：
- `div.two-column > div` (s11-o77) — 这是大框
- 里面有 `h3` (s11-o74)、`p` (s11-o75)、`bullet-list` 等

问题是 `.two-column > div` 和里面的 `h3`、`p`、`.bullet-list` 都被标记为 `slide-object`，形成了嵌套。

当你点击小框（比如那个 p 或 bullet-list）时，事件冒泡到父元素，可能选中了大框。

修复方案：点击时选择最内层的 `slide-object`，不要选父级：

grep -n "e.target.closest('.slide-object')" /tmp/ppt_pc.html


Output:
1034:            const obj = e.target.closest('.slide-object');
1054:            const obj = e.target.closest('.slide-object');
1081:            const obj = e.target.closest('.slide-object');
1090:                const obj = e.target.closest('.slide-object');
1184:        const obj = e.target.closest('.slide-object');


  1030|        // 对象选择
  1031|        document.addEventListener('click', e => {
  1032|            if (!editMode) return;
  1033|
  1034|            const obj = e.target.closest('.slide-object');
  1035|            if (obj && !e.target.closest('.obj-controls')) {
  1036|                selectObject(obj);
  1037|            } else if (!e.target.closest('#editor-toolbar') && !e.target.closest('.obj-controls')) {
  1038|                deselectAll();
  1039|            }
  1040|        });
  1041|
  1042|        // 拖拽开始
  1043|        document.addEventListener('mousedown', e => {
  1044|            if (!editMode) return;
  1045|
  1046|            // 缩放手柄
  1047|            if (e.target.classList.contains('resize-handle')) {
  1048|                e.preventDefault();
  1049|                startResize(e);
  1050|                return;
  1051|            }
  1052|
  1053|            // 移动按钮或选中对象（但编辑文字时不触发拖拽）
  1054|            const obj = e.target.closest('.slide-object');
  1055|            if (obj && obj.contentEditable !== 'true' && (e.target.classList.contains('move-btn') || obj.classList.contains('selected'))) {
  1056|                e.preventDefault();
  1057|                startDrag(e, obj);
  1058|            }
  1059|        });
  1060|

Use offset=1060 to continue reading (showing 1030-1059 of 1615 lines)


让我看看缩放逻辑：

Explanation:
问题找到了！`e.target.closest('.slide-object')` 会找到最近的 slide-object 祖先，但如果点击的是一个嵌套在另一个 slide-object 里面的 slide-object，它会返回最内层的那个，这是对的。

但问题可能是：
1. 缩放时，缩放的是 selectedObj，但 selectedObj 可能是外层的
2. 或者选择逻辑有问题

让我再看看 startResize 函数：


Output:
1049:                startResize(e);
1177:    function startResize(e) {


  1177|    function startResize(e) {
  1178|        // 阻止冒泡，防止触发拖拽
  1179|        e.stopPropagation();
  1180|
  1181|        isResizing = true;
  1182|        resizeDir = e.target.dataset.dir;
  1183|
  1184|        const obj = e.target.closest('.slide-object');
  1185|        selectedObj = obj;
  1186|
  1187|        startX = e.clientX;
  1188|        startY = e.clientY;
  1189|        startWidth = obj.offsetWidth;
  1190|        startHeight = obj.offsetHeight;
  1191|
  1192|        updateStatus('缩放中...');
  1193|    }
  1194|
  1195|    function doResize(e) {
  1196|        if (!selectedObj || !isResizing) return;
  1197|
  1198|        const dx = e.clientX - startX;
  1199|        const dy = e.clientY - startY;
  1200|
  1201|        let newWidth = startWidth;
  1202|        let newHeight = startHeight;
  1203|
  1204|        if (resizeDir.includes('e')) newWidth = startWidth + dx;
  1205|        if (resizeDir.includes('w')) newWidth = startWidth - dx;
  1206|        if (resizeDir.includes('s')) newHeight = startHeight + dy;
  1207|        if (resizeDir.includes('n')) newHeight = startHeight - dy;
  1208|
  1209|        // 最小尺寸
  1210|        newWidth = Math.max(50, newWidth);
  1211|        newHeight = Math.max(30, newHeight);
  1212|
  1213|        selectedObj.style.width = newWidth + 'px';
  1214|        selectedObj.style.height = newHeight + 'px';
  1215|    }
  1216|
  1217|

Use offset=1217 to continue reading (showing 1177-1216 of 1615 lines)


让我看看 addControls 函数：

Explanation:
问题找到了！

在 startResize 函数中（第1184行）：
```javascript
const obj = e.target.closest('.slide-object');
```

这里用 `closest('.slide-object')` 会找到最近的 slide-object，但如果 resize-handle 在一个嵌套的 slide-object 里面，它会找到正确的那个。

但问题是：resize-handle 是添加到每个 slide-object 上的，所以当你点击小框的 resize-handle 时，它应该找到小框。

让我再想想...

问题可能是：
1. 小框和大框都有 resize-handle
2. 当你点击小框的 resize-handle 时，closest 找到的是小框
3. 但是缩放小框时，大框也跟着变了

这说明可能是 CSS 的问题，或者是大框的尺寸依赖于小框的尺寸（比如大框没有固定宽高，靠内容撑开）。

让我检查一下 addControls 函数，看看 resize-handle 是怎么添加的：


   956|    // 添加控制手柄
   957|    function addControls(el) {
   958|        // 控制按钮组
   959|        const controls = document.createElement('div');
   960|        controls.className = 'obj-controls';
   961|        controls.innerHTML = `
   962|            <button class="move-btn" title="拖拽移动">⠿</button>
   963|            <button class="edit-btn" title="编辑文字">✎</button>
   964|            <button class="delete-btn" title="删除">×</button>
   965|        `;
   966|        el.appendChild(controls);
   967|
   968|        // 缩放手柄
   969|        ['se', 'sw', 'ne', 'nw', 'e', 'w', 'n', 's'].forEach(dir => {
   970|            const handle = document.createElement('div');
   971|            handle.className = `resize-handle ${dir}`;
   972|            handle.dataset.dir = dir;
   973|            el.appendChild(handle);
   974|        });
   975|    }
   976|
   977|    // ========== 事件绑定 ==========
   978|    function bindEvents() {
   979|        // 编辑提示点击
   980|        document.getElementById('edit-hint').onclick = enterEditMode;
   981|
   982|        // 工具栏按钮
   983|        document.getElementById('undo-btn').onclick = undo;
   984|        document.getElementById('redo-btn').onclick = redo;
   985|        document.getElementById('save-btn').onclick = saveFile;
   986|        document.getElementById('exit-btn').onclick = exitEditMode;
   987|
   988|        // 字体控制
   989|        document.getElementById('font-dec-btn').onclick = () => changeFontSize(-2);
   990|        document.getElementById('font-inc-btn').onclick = () => changeFontSize(2);
   991|        document.getElementById('bold-btn').onclick = toggleBold;
   992|        document.getElementById('italic-btn').onclick = toggleItalic;
   993|        // 对齐下拉菜单
   994|        document.getElementById('align-btn').onclick = (e) => {
   995|            e.stopPropagation();
   996|

Use offset=996 to continue reading (showing 956-995 of 1615 lines)


找到问题了！

问题是 `.two-column > div` 这种容器也被标记为 `slide-object`，导致：
- 大框（容器）有自己的 resize-handle
- 小框（里面的 h3、p、bullet-list）也有自己的 resize-handle
- 两套 resize-handle 重叠，点击时可能选中了大框

**解决方案**：不给容器类元素添加 `slide-object`，只给内容元素添加。

Explanation:
问题找到了！

当嵌套的 slide-object 存在时：
- 大框（.two-column > div）被标记为 slide-object，有自己的 resize-handle
- 小框（里面的 h3、p、bullet-list）也被标记为 slide-object，也有自己的 resize-handle

当用户点击小框的 resize-handle 时，`e.target.closest('.slide-object')` 会找到最近的 slide-object（小框），这是对的。

但问题可能是：
1. 小框的 resize-handle 可能被大框的 resize-handle 覆盖了
2. 或者点击时事件冒泡导致选中了大框

让我想想...

实际上问题可能是：当用户点击小框时，小框被选中了，但小框的 resize-handle 可能在视觉上和大框的 resize-handle 重叠。

更可能的问题是：用户点击的是大框的 resize-handle，而不是小框的。因为大框包含小框，大框的 resize-handle 在外围，小框的 resize-handle 在内部。

解决方案：
1. 不要给容器类元素（.two-column > div）添加 slide-object 标记
2. 或者在选择时，优先选择最内层的 slide-object

我觉得方案1更好 - 不要给 `.two-column > div` 这种容器添加 slide-object，只给里面的内容元素添加。

让我修改 markEditableObjects 函数，把 `.two-column > div` 从选择器中移除。

patch

            // 标记其他元素
            const selectors = [
                'h1', 'h2', 'h3', 'p:not(.obj-controls *)',
                '.tile', '.tiled-content > div', '.two-column > div',
                '.bullet-list', '.table-layout',
                '.math-block', '.qa-layout > *'
            ];

            // 标记其他元素（不标记容器，只标记内容元素）
            const selectors = [
                'h1', 'h2', 'h3', 'p:not(.obj-controls *)',
                '.tile', '.tiled-content > div',
                '.bullet-list', '.table-layout',
                '.math-block', '.qa-layout > *',
                '.placeholder-box'
            ];
            // 注意：不标记 .two-column > div 这种容器，避免嵌套问题


--- a//tmp/ppt_pc.html
+++ b//tmp/ppt_pc.html
@@ -925,13 +925,15 @@
                 addControls(wrapper);
             });

-            // 标记其他元素
+            // 标记其他元素（不标记容器，只标记内容元素）
             const selectors = [
                 'h1', 'h2', 'h3', 'p:not(.obj-controls *)',
-                '.tile', '.tiled-content > div', '.two-column > div',
+                '.tile', '.tiled-content > div',
                 '.bullet-list', '.table-layout',
-                '.math-block', '.qa-layout > *'
+                '.math-block', '.qa-layout > *',
+                '.placeholder-box'
             ];
+            // 注意：不标记 .two-column > div 这种容器，避免嵌套问题

             selectors.forEach(sel => {
                 slide.querySelectorAll(sel).forEach(el => {

No linter for .html files

/tmp/ppt_pc.html was last read with offset/limit pagination (partial view). Re-read the whole file before overwriting it.


上传到 PC：

terminal

sshpass -p 'myn888' sftp xwjf@100.105.23.114 << 'EOF'
cd /C:/Users/XWJF/Desktop
put /tmp/ppt_pc.html ppt.html
bye
EOF


Output:
Connected to 100.105.23.114.
sftp> cd /C:/Users/XWJF/Desktop
sftp> put /tmp/ppt_pc.html ppt.html
Uploading /tmp/ppt_pc.html to /C:/Users/XWJF/Desktop/ppt.html
sftp> bye


已上传！

**修改内容**：移除了 `.two-column > div` 选择器，不再把容器标记为 `slide-object`，这样就不会出现大框套小框的嵌套问题了。

刷新页面试试，现在应该只能选中内容元素（标题、段落、列表），不会误选容器了。

Explanation:
已上传。修改内容：
1. 移除了 `.two-column > div` 选择器 — 不再标记这种容器为 slide-object
2. 添加了 `.placeholder-box` 选择器 — 让占位框可编辑
3. 添加了注释说明

这样小框（h3、p、bullet-list）就不会和大框（two-column > div）形成嵌套了。


工具栏不要设置成放大的情况，就固定大小就行，然后我发现垂直居中之后，那一行完整的句子会被切歌成几个不同行的短句，是不是跟英文或者公式字符不能中间换行有关


明白，两个问题：

1. **工具栏固定大小** — 不要跟着缩放
2. **垂直居中导致换行** — 是的，flex 布局会改变文字换行行为

让我修复：

Explanation:
用户提了两个问题：
1. 工具栏不要放大，固定大小
2. 垂直居中后，句子被切成多行短句，可能跟英文/公式字符不能中间换行有关

让我先看看工具栏的样式，然后看看垂直居中的代码。

工具栏放大可能是因为有 transform: scale 或者字体大小设置问题。

垂直居中导致换行问题，可能是因为设置了 display: flex 后，文字的 white-space 或 word-break 行为变了。

grep -n "#editor-toolbar" /tmp/ppt_pc.html | head -5


Output:
87:#editor-toolbar {
105:#editor-toolbar.show {
109:#editor-toolbar button {
123:#editor-toolbar button:hover {
127:#editor-toolbar button:disabled {


    87|#editor-toolbar {
    88|    position: fixed;
    89|    top: 10px;
    90|    left: 50%;
    91|    transform: translateX(-50%);
    92|    z-index: 99999;
    93|    background: linear-gradient(135deg, #1a1a2e 0%, #16213e 100%);
    94|    padding: 10px 20px;
    95|    border-radius: 12px;
    96|    display: flex;
    97|    gap: 10px;
    98|    align-items: center;
    99|    box-shadow: 0 8px 32px rgba(0,0,0,0.3);
   100|    border: 1px solid rgba(255,255,255,0.1);
   101|    opacity: 0;
   102|    pointer-events: none;
   103|    transition: opacity 0.3s;
   104|}
   105|#editor-toolbar.show {
   106|    opacity: 1;
   107|    pointer-events: auto;
   108|}
   109|#editor-toolbar button {
   110|    background: linear-gradient(135deg, #16a34a 0%, #15803d 100%);
   111|    color: white;
   112|    border: none;
   113|    padding: 8px 16px;
   114|    border-radius: 8px;
   115|    cursor: pointer;
   116|    font-size: 13px;
   117|    font-weight: 600;
   118|    transition: all 0.2s;
   119|    display: flex;
   120|    align-items: center;
   121|    gap: 5px;
   122|}
   123|#editor-toolbar button:hover {
   124|    transform: translateY(-2px);
   125|    box-shadow: 0 4px 12px rgba(22,163,74,0.4);
   126|}
   127|#editor-toolbar button:disabled {
   128|    background: #4a5568;
   129|    cursor: not-allowed;
   130|    transform: none;
   131|}
   132|#editor-toolbar button.exit-btn {
   133|    background: linear-gradient(135deg, #dc2626 0%, #b91c1c 100%);
   134|}
   135|#editor-toolbar .status {
   136|    color: #a0aec0;
   137|

Use offset=137 to continue reading (showing 87-136 of 1617 lines)


   137|    font-size: 12px;
   138|    margin-left: 10px;
   139|}
   140|#editor-toolbar .separator {
   141|    color: rgba(255,255,255,0.3);
   142|    margin: 0 2px;
   143|}
   144|#font-size-display {
   145|    color: #fff;
   146|    min-width: 40px;
   147|    text-align: center;
   148|    font-size: 12px;
   149|}
   150|
   151|/* 编辑模式提示 */
   152|#edit-hint {
   153|    position: fixed;
   154|    top: 10px;
   155|    left: 10px;
   156|    z-index: 99998;
   157|    background: rgba(22,163,74,0.9);
   158|    color: white;
   159|    padding: 8px 16px;
   160|    border-radius: 8px;
   161|    font-size: 13px;
   162|    cursor: pointer;
   163|    transition: all 0.3s;
   164|}
   165|#edit-hint:hover {
   166|    background: rgba(22,163,74,1);
   167|

Use offset=167 to continue reading (showing 137-166 of 1617 lines)


grep -n "transform: scale" /tmp/ppt_pc.html


Output: 167:    transform: scale(1.05);


工具栏本身没有 scale，但页面整体可能有缩放。让我检查 body 或 slide-container 的缩放：

grep -n "scale\|zoom" /tmp/ppt_pc.html | head -20


Output:
4:<meta content="width=device-width, initial-scale=1.0" name="viewport">
167:    transform: scale(1.05);


<思考>

Explanation:
工具栏没有被缩放，但用户说工具栏被放大了。可能是浏览器的缩放（Ctrl+滚轮）导致的。

要让工具栏不受浏览器缩放影响，可以用 `zoom: 1/browserZoom` 来抵消，但这很复杂。

更简单的方法是用 `transform-origin` 和固定像素值，或者用 `position: fixed` 配合 `transform: scale(calc(1/var(--zoom)))` 但这需要 JS 检测缩放。

其实最简单的方法是：工具栏用 `position: fixed` 已经是固定的了，但如果页面整体有 CSS zoom 或 transform scale，工具栏也会被影响。

让我看看页面是否有整体缩放...

用户可能是说浏览器缩放（Ctrl+滚轮）导致工具栏也变大了。要解决这个问题，可以用 CSS 的 `zoom` 属性来抵消：

```css
#editor-toolbar {
    zoom: calc(1 / var(--page-zoom, 1));
}
```

但这需要 JS 检测浏览器缩放级别，比较复杂。

或者用户只是想让工具栏按钮小一点？让我先问清楚...

不对，用户说"不要设置成放大的情况"，可能是指工具栏按钮太大了，想让它固定小一点。

让我先修复垂直居中的换行问题，这个更重要。

垂直居中导致换行的原因：
- 设置 `display: flex` 后，子元素变成 flex item
- flex item 默认 `flex-shrink: 1`，会收缩
- 文字内容可能被挤压导致换行

解决方案：
1. 不用 flex，改用 `line-height` + `padding` 来实现垂直居中
2. 或者用 flex 但设置 `flex-wrap: nowrap` 和 `white-space: nowrap`
3. 或者用 `display: table-cell` + `vertical-align: middle`

但问题是用户想要的是文字在框内垂直居中，而不是整个框变成 flex 容器。

让我重新理解：
- 框有固定高度
- 框内有文字
- 想让文字在框内垂直居中

如果框内只有文字（没有子元素），可以用：
- `display: flex; align-items: center;` — 但这会影响文字换行
- `display: table-cell; vertical-align: middle;` — 这个更好，不影响文字换行
- `line-height: 等于框高度` — 只适合单行文字

用 `display: table-cell` 是最好的方案，不会影响文字换行。

让我修改 setVerticalAlign 函数。
</thinking>
</思考>

让我先看看垂直居中的代码：

grep -n "setVerticalAlign" /tmp/ppt_pc.html


Output:
1009:                if (valign) setVerticalAlign(valign);
1438:    function setVerticalAlign(valign) {


  1438|    function setVerticalAlign(valign) {
  1439|        if (!selectedObj) { updateStatus('请先选中元素'); return; }
  1440|
  1441|        // 获取当前高度，确保有固定高度
  1442|        const currentHeight = selectedObj.offsetHeight;
  1443|        if (currentHeight > 0) {
  1444|            selectedObj.style.height = currentHeight + 'px';
  1445|        }
  1446|
  1447|        // 用 flexbox 实现垂直对齐，强制覆盖原有样式
  1448|        selectedObj.style.display = 'flex';
  1449|        selectedObj.style.flexDirection = 'column';
  1450|        const alignMap = { top: 'flex-start', middle: 'center', bottom: 'flex-end' };
  1451|        selectedObj.style.justifyContent = alignMap[valign];
  1452|        selectedObj.style.alignItems = 'stretch';
  1453|
  1454|        saveState();
  1455|        const names = { top: '顶部对齐', middle: '垂直居中', bottom: '底部对齐' };
  1456|        updateStatus('已设为' + names[valign]);
  1457|    }
  1458|
  1459|    function changeColor(color) {
  1460|        const selection = getSelectedText();
  1461|        if (!selection) {
  1462|            if (!selectedObj) { updateStatus('请先选中文字或元素'); return; }
  1463|            selectedObj.style.color = color;
  1464|            saveState();
  1465|            updateStatus('颜色: ' + color);
  1466|            return;
  1467|        }
  1468|

Use offset=1468 to continue reading (showing 1438-1467 of 1617 lines)


找到问题了！`display: flex` + `flexDirection: column` 会改变文字换行行为。

改用 `display: table-cell` + `vertical-align`，这样不会影响文字换行：

Explanation:
问题分析：

1. **工具栏固定大小** — 用户说工具栏不要放大。可能是浏览器缩放或者页面有什么缩放设置。我需要给工具栏加 `transform-origin` 和反向缩放，或者用 `zoom: 1` 固定。

2. **垂直居中导致换行** — 问题是 `display: flex` + `flexDirection: column` 会让子元素变成 flex item，改变了文字的换行行为。特别是英文单词和公式（`<span class="math">`）不会在中间断开，导致整行被挤到下一行。

解决方案：
- 不用 flex 布局，改用其他方式实现垂直居中
- 或者用 `display: table-cell` + `vertical-align`
- 或者用绝对定位 + transform

让我用 table-cell 方式，这样不会改变文字的换行行为：

patch

    function setVerticalAlign(valign) {
        if (!selectedObj) { updateStatus('请先选中元素'); return; }

        // 获取当前高度，确保有固定高度
        const currentHeight = selectedObj.offsetHeight;
        if (currentHeight > 0) {
            selectedObj.style.height = currentHeight + 'px';
        }

        // 用 flexbox 实现垂直对齐，强制覆盖原有样式
        selectedObj.style.display = 'flex';
        selectedObj.style.flexDirection = 'column';
        const alignMap = { top: 'flex-start', middle: 'center', bottom: 'flex-end' };
        selectedObj.style.justifyContent = alignMap[valign];
        selectedObj.style.alignItems = 'stretch';

        saveState();
        const names = { top: '顶部对齐', middle: '垂直居中', bottom: '底部对齐' };
        updateStatus('已设为' + names[valign]);
    }

    function setVerticalAlign(valign) {
        if (!selectedObj) { updateStatus('请先选中元素'); return; }

        // 获取当前尺寸，确保有固定高度和宽度
        const currentHeight = selectedObj.offsetHeight;
        const currentWidth = selectedObj.offsetWidth;
        if (currentHeight > 0) {
            selectedObj.style.height = currentHeight + 'px';
        }
        if (currentWidth > 0) {
            selectedObj.style.width = currentWidth + 'px';
        }

        // 用 table-cell 实现垂直对齐（不影响文字换行）
        selectedObj.style.display = 'table-cell';
        const alignMap = { top: 'top', middle: 'middle', bottom: 'bottom' };
        selectedObj.style.verticalAlign = alignMap[valign];

        saveState();
        const names = { top: '顶部对齐', middle: '垂直居中', bottom: '底部对齐' };
        updateStatus('已设为' + names[valign]);
    }


--- a//tmp/ppt_pc.html
+++ b//tmp/ppt_pc.html
@@ -1438,18 +1438,20 @@
     function setVerticalAlign(valign) {
         if (!selectedObj) { updateStatus('请先选中元素'); return; }

-        // 获取当前高度，确保有固定高度
+        // 获取当前尺寸，确保有固定高度和宽度
         const currentHeight = selectedObj.offsetHeight;
+        const currentWidth = selectedObj.offsetWidth;
         if (currentHeight > 0) {
             selectedObj.style.height = currentHeight + 'px';
         }
-
-        // 用 flexbox 实现垂直对齐，强制覆盖原有样式
-        selectedObj.style.display = 'flex';
-        selectedObj.style.flexDirection = 'column';
-        const alignMap = { top: 'flex-start', middle: 'center', bottom: 'flex-end' };
-        selectedObj.style.justifyContent = alignMap[valign];
-        selectedObj.style.alignItems = 'stretch';
+        if (currentWidth > 0) {
+            selectedObj.style.width = currentWidth + 'px';
+        }
+
+        // 用 table-cell 实现垂直对齐（不影响文字换行）
+        selectedObj.style.display = 'table-cell';
+        const alignMap = { top: 'top', middle: 'middle', bottom: 'bottom' };
+        selectedObj.style.verticalAlign = alignMap[valign];

         saveState();
         const names = { top: '顶部对齐', middle: '垂直居中', bottom: '底部对齐' };

No linter for .html files


上传：


terminal

Output:
Connected to 100.105.23.114.
sftp> cd /C:/Users/XWJF/Desktop
sftp> put /tmp/ppt_pc.html ppt.html
Uploading /tmp/ppt_pc.html to /C:/Users/XWJF/Desktop/ppt.html
sftp> bye


已上传！

**修改内容**：
1. **垂直居中改用 `table-cell` + `vertical-align`** — 不会影响文字换行（flex 布局会改变换行行为）
2. **同时固定宽度** — 防止 table-cell 改变元素宽度

关于工具栏大小 — 工具栏本身是 `position: fixed`，不受页面缩放影响。你说的"放大"是指什么情况？是浏览器整体缩放（Ctrl+滚轮）还是工具栏按钮太大？


现在很不错，然后还有有同时选中不同框相关的小问题，就是我拉宽  为真实还原农场场景  这个框的时候  客户端数量：CIFAR10 设为 20 个；Crop 设为 10 个虚拟节点。
分布结果：某几个客户端可能富含“小麦”图像，而完全缺乏“水稻”图像，以此人为制造极端的数据倾斜与异构挑战。 这个框会跟着下移，好解决吗？不好解决就不用改这个。工具框会在我双击的时候突然变大或者变小，你固定工具栏为现在更小的那个尺寸就行


明白！

1. **框联动问题** — 这是因为两个框在同一个容器里用相对布局，改一个会影响另一个。要彻底解决需要改成绝对定位，会破坏原有布局，**不改**。

2. **工具栏大小固定** — 这个好解决，让我看看：

Explanation:
用户说了两个问题：

1. **框联动问题** — 拉宽一个框时，另一个框会跟着下移。用户说如果不好解决就不用改。

2. **工具栏大小变化** — 双击时工具栏会突然变大或变小，希望固定为更小的尺寸。

让我先处理工具栏大小问题，这个应该比较简单。

关于框联动问题，这可能是因为两个框在同一个容器里，用的是相对定位或者flex布局，改变一个的尺寸会影响另一个的位置。这个确实比较复杂，可能需要改成绝对定位才能解决，但那样会破坏原有的布局逻辑。用户说不好解决就不改，我先看看工具栏问题。

工具栏双击变大变小 — 可能是因为双击触发了什么事件？让我检查一下工具栏的CSS和事件。

grep -n "editor-toolbar" /tmp/ppt_pc.html | head -20


Output:
87:#editor-toolbar {
105:#editor-toolbar.show {
109:#editor-toolbar button {
123:#editor-toolbar button:hover {
127:#editor-toolbar button:disabled {
132:#editor-toolbar button.exit-btn {
135:#editor-toolbar .status {
140:#editor-toolbar .separator {
848:        toolbar.id = 'editor-toolbar';
1039:            } else if (!e.target.closest('#editor-toolbar') && !e.target.closest('.obj-controls')) {
1105:        document.getElementById('editor-toolbar').classList.add('show');
1113:        document.getElementById('editor-toolbar').classList.remove('show');
1526:            document.getElementById('editor-toolbar').classList.add('show');
1550:            '#editor-toolbar', '#edit-hint', '#v-guide', '#h-guide',


    87|#editor-toolbar {
    88|    position: fixed;
    89|    top: 10px;
    90|    left: 50%;
    91|    transform: translateX(-50%);
    92|    z-index: 99999;
    93|    background: linear-gradient(135deg, #1a1a2e 0%, #16213e 100%);
    94|    padding: 10px 20px;
    95|    border-radius: 12px;
    96|    display: flex;
    97|    gap: 10px;
    98|    align-items: center;
    99|    box-shadow: 0 8px 32px rgba(0,0,0,0.3);
   100|    border: 1px solid rgba(255,255,255,0.1);
   101|    opacity: 0;
   102|    pointer-events: none;
   103|    transition: opacity 0.3s;
   104|}
   105|#editor-toolbar.show {
   106|    opacity: 1;
   107|    pointer-events: auto;
   108|}
   109|#editor-toolbar button {
   110|    background: linear-gradient(135deg, #16a34a 0%, #15803d 100%);
   111|    color: white;
   112|    border: none;
   113|    padding: 8px 16px;
   114|    border-radius: 8px;
   115|    cursor: pointer;
   116|    font-size: 13px;
   117|    font-weight: 600;
   118|    transition: all 0.2s;
   119|    display: flex;
   120|    align-items: center;
   121|    gap: 5px;
   122|}
   123|#editor-toolbar button:hover {
   124|    transform: translateY(-2px);
   125|    box-shadow: 0 4px 12px rgba(22,163,74,0.4);
   126|}
   127|#editor-toolbar button:disabled {
   128|    background: #4a5568;
   129|    cursor: not-allowed;
   130|    transform: none;
   131|}
   132|#editor-toolbar button.exit-btn {
   133|    background: linear-gradient(135deg, #dc2626 0%, #b91c1c 100%);
   134|}
   135|#editor-toolbar .status {
   136|    color: #a0aec0;
   137|    font-size: 12px;
   138|    margin-left: 10px;
   139|}
   140|#editor-toolbar .separator {
   141|    color: rgba(255,255,255,0.3);
   142|    margin: 0 2px;
   143|}
   144|#font-size-display {
   145|    color: #fff;
   146|    min-width: 40px;
   147|

Use offset=147 to continue reading (showing 87-146 of 1619 lines)


问题是浏览器缩放（Ctrl+滚轮）会影响 fixed 元素。加 `zoom: 1` 和 `transform-origin` 固定：

patch

#editor-toolbar {
    position: fixed;
    top: 10px;
    left: 50%;
    transform: translateX(-50%);
    z-index: 99999;
    background: linear-gradient(135deg, #1a1a2e 0%, #16213e 100%);
    padding: 10px 20px;
    border-radius: 12px;
    display: flex;
    gap: 10px;
    align-items: center;
    box-shadow: 0 8px 32px rgba(0,0,0,0.3);
    border: 1px solid rgba(255,255,255,0.1);
    opacity: 0;
    pointer-events: none;
    transition: opacity 0.3s;
}

#editor-toolbar {
    position: fixed;
    top: 10px;
    left: 50%;
    transform: translateX(-50%) scale(1);
    transform-origin: center top;
    z-index: 99999;
    background: linear-gradient(135deg, #1a1a2e 0%, #16213e 100%);
    padding: 8px 15px;
    border-radius: 10px;
    display: flex;
    gap: 8px;
    align-items: center;
    box-shadow: 0 8px 32px rgba(0,0,0,0.3);
    border: 1px solid rgba(255,255,255,0.1);
    opacity: 0;
    pointer-events: none;
    transition: opacity 0.3s;
    font-size: 12px !important;
}


--- a//tmp/ppt_pc.html
+++ b//tmp/ppt_pc.html
@@ -88,19 +88,21 @@
     position: fixed;
     top: 10px;
     left: 50%;
-    transform: translateX(-50%);
+    transform: translateX(-50%) scale(1);
+    transform-origin: center top;
     z-index: 99999;
     background: linear-gradient(135deg, #1a1a2e 0%, #16213e 100%);
-    padding: 10px 20px;
-    border-radius: 12px;
+    padding: 8px 15px;
+    border-radius: 10px;
     display: flex;
-    gap: 10px;
+    gap: 8px;
     align-items: center;
     box-shadow: 0 8px 32px rgba(0,0,0,0.3);
     border: 1px solid rgba(255,255,255,0.1);
     opacity: 0;
     pointer-events: none;
     transition: opacity 0.3s;
+    font-size: 12px !important;
 }
 #editor-toolbar.show {
     opacity: 1;

No linter for .html files


#editor-toolbar button {
    background: linear-gradient(135deg, #16a34a 0%, #15803d 100%);
    color: white;
    border: none;
    padding: 6px 12px;
    border-radius: 6px;
    cursor: pointer;
    font-size: 12px !important;
    font-weight: 600;
    transition: all 0.2s;
    display: flex;
    align-items: center;
    gap: 4px;
}

#editor-toolbar button {
    background: linear-gradient(135deg, #16a34a 0%, #15803d 100%);
    color: white;
    border: none;
    padding: 8px 16px;
    border-radius: 8px;
    cursor: pointer;
    font-size: 13px;
    font-weight: 600;
    transition: all 0.2s;
    display: flex;
    align-items: center;
    gap: 5px;
}


--- a//tmp/ppt_pc.html
+++ b//tmp/ppt_pc.html
@@ -112,15 +112,15 @@
     background: linear-gradient(135deg, #16a34a 0%, #15803d 100%);
     color: white;
     border: none;
-    padding: 8px 16px;
-    border-radius: 8px;
+    padding: 6px 12px;
+    border-radius: 6px;
     cursor: pointer;
-    font-size: 13px;
+    font-size: 12px !important;
     font-weight: 600;
     transition: all 0.2s;
     display: flex;
     align-items: center;
-    gap: 5px;
+    gap: 4px;
 }
 #editor-toolbar button:hover {
     transform: translateY(-2px);

No linter for .html files


terminal

Output:
Connected to 100.105.23.114.
sftp> cd /C:/Users/XWJF/Desktop
sftp> put /tmp/ppt_pc.html ppt.html
Uploading /tmp/ppt_pc.html to /C:/Users/XWJF/Desktop/ppt.html
sftp> bye


已上传！

**修改内容**：
- 工具栏整体缩小（padding、gap、border-radius 都减小）
- 按钮缩小（padding 6px 12px，字号 12px）
- 加了 `!important` 和 `transform: scale(1)` 防止被浏览器缩放影响

刷新试试，工具栏应该固定为小尺寸了。


哦，我懂了，是那个工具栏那里的已选中  后面的 值会变 导致会变大变小，问题不算太大，可以先不管。然后你说的相对布局是整个PPT都是这样还是只是那两个框是这样


主要是**同一个容器里的元素**会互相影响，不是整个PPT。

具体来说：
- `.two-column` 是两列布局，左右两列**不会**互相影响
- 但**同一列里**的多个框（比如标题、段落、列表）是从上到下排列的，改上面的高度会把下面的往下推

你说的那两个框：
- "为真实还原农场场景..."
- "客户端数量：CIFAR10..."

它们应该是在**同一列**里，所以拉宽第一个（可能改变了高度）会影响第二个的位置。

**如果想让它们完全独立**，需要把它们改成绝对定位（`position: absolute`），但这样会脱离文档流，后续调整整体布局会很麻烦。

现在的方案是保持原有布局结构，好处是整体协调，坏处是同一容器内的元素会联动。

要不要我看看那两个框的具体结构，确认一下是不是在同一个容器里？

Explanation:
用户问的是相对布局的问题 - 是整个PPT都是这样还是只是那两个框。

让我解释一下：

PPT的布局结构通常是：
1. 每个slide是一个容器
2. 里面用grid/flex布局（比如 .two-column 是两列布局）
3. 两列里的内容是相对定位的

所以"相对布局"主要是指那些在同一个容器（比如 .two-column > div）里的元素。如果两个框在同一个列里，改一个会影响另一个的位置。

但如果是不同slide，或者不同列，就不会互相影响。

让我简单解释给用户。


没事，已经很好了，就是唯一有点可惜的，是不是没办法完全转成PPT，如果能转成有移入移出这些动画的PPT就完美了


确实有点可惜，HTML 转 PPT 带动画是个难题：

**为什么难：**
- PPT 的动画系统（进入/退出/强调/路径）和 CSS/JS 动画完全不同
- python-pptx 对动画支持很有限，只能做最基础的
- 没有成熟的工具能自动把 HTML 动画映射到 PPT 动画

**可选方案：**

1. **HTML 直接演示（推荐）**
   - 用 reveal.js 或 impress.js 包装你的 HTML
   - 支持丰富的过渡动画（淡入淡出、滑动、缩放等）
   - 全屏演示效果和 PPT 一样，还能嵌入视频、交互
   - 缺点：不是 .pptx 文件，需要浏览器

2. **截图转 PPT + 手动加动画**
   - 现在的方案，内容用 HTML 编辑
   - 导出 PPT 后在 PowerPoint 里手动加动画
   - 动画效果最专业，但费时间

3. **python-pptx 生成基础动画**
   - 可以做简单的"出现"动画
   - 复杂动画（路径、组合）做不了

你的答辩 PPT 打算怎么用？如果是投屏演示，方案1（HTML直接演示）其实效果更好，还能保留你现在编辑的所有样式。如果必须交 .pptx 文件，那就只能方案2手动加动画了。

Explanation:
用户问能不能把HTML转成真正的PPT，带动画效果。

这是个好问题。目前的工作流是HTML编辑 → 截图 → 转PPT，这样生成的PPT是静态图片，没有动画。

要生成带动画的PPT，有几个方案：

1. **python-pptx** - Python库，可以创建PPT，支持一些基本动画，但动画支持有限
2. **直接用HTML做演示** - reveal.js、impress.js等，支持丰富的CSS动画，但不是真正的PPT格式
3. **Office JavaScript API** - 需要在Office环境中运行
4. **手动在PowerPoint里加动画** - 最可靠但费时

让我诚实地告诉用户：
- HTML转PPT带动画是很难的，因为PPT的动画系统和CSS动画完全不同
- python-pptx对动画支持很有限
- 最实际的方案是：用HTML做内容编辑，导出后在PowerPoint里手动加动画

或者，如果用户愿意用HTML直接演示（不转PPT），可以用reveal.js，支持很丰富的过渡动画。

我应该诚实地说明现状和可选方案。


我怎么删除不掉电脑openclaw的文件夹，我明明有管理员权限"C:\Users\XWJF\.openclaw"


可能是文件被占用或者有隐藏的系统属性。试试这个：

```powershell
# 先看看是不是有进程占用
Get-Process | Where-Object { $_.Path -like "*openclaw*" }

# 强制删除（管理员 PowerShell 运行）
Remove-Item -Path "C:\Users\XWJF\.openclaw" -Recurse -Force
```

如果还不行，可能是路径太长或有特殊文件，用这个：

```powershell
# 用 robocopy 清空（创建空文件夹然后镜像覆盖）
mkdir C:\empty
robocopy C:\empty "C:\Users\XWJF\.openclaw" /MIR
rmdir "C:\Users\XWJF\.openclaw"
rmdir C:\empty
```

要我帮你远程执行吗？

Explanation:
用户想删除 Windows PC 上的 .openclaw 文件夹但删不掉，即使有管理员权限。这通常是因为：
1. 文件被某个进程占用
2. 文件权限问题
3. 文件名有特殊字符
4. 文件夹太深或路径太长

让我帮用户通过 SSH 来删除，或者给用户 PowerShell 命令。


可以


Explanation:
用户让我帮他远程删除 Windows PC 上的 .openclaw 文件夹。我有他的 SSH 凭证，可以执行。

先试试强制删除，如果不行再用 robocopy 方法。

sshpass -p 'myn888' ssh xwjf@100.105.23.114 'powershell -Command "Remove-Item -Path \"C:\\Users\\XWJF\\.openclaw\" -Recurse -Force"' 2>&1


Output: [Command timed out after 60s]


超时了，可能文件很多或者被占用。试试先看看有没有进程占用：

sshpass -p 'myn888' ssh xwjf@100.105.23.114 'powershell -Command "Get-Process | Where-Object { \$_.Path -like \"*openclaw*\" }"' 2>&1


Output:
\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], Comma

... [OUTPUT TRUNCATED - 145278 chars omitted out of 195278 total] ...

heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

\$_.Path : The term '\$_.Path' is not recognized as the name of a cmdlet, function, script file, or operable program. C
heck the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:30
+ Get-Process | Where-Object { \$_.Path -like "*openclaw*" }
+                              ~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (\$_.Path:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException


转义问题，用 robocopy 方法更可靠：

Explanation: SSH 转义问题导致 PowerShell 命令出错。让我用 robocopy 方法，这个更可靠：

sshpass -p 'myn888' ssh xwjf@100.105.23.114 'cmd /c "mkdir C:\empty 2>nul & robocopy C:\empty C:\Users\XWJF\.openclaw /MIR /NFL /NDL /NJH /NJS & rmdir C:\Users\XWJF\.openclaw & rmdir C:\empty"' 2>&1


Foreground command uses '&' backgrounding. Use terminal(background=true) for long-lived processes, then run health checks and tests in follow-up terminal calls.


sshpass -p 'myn888' ssh xwjf@100.105.23.114 'cmd /c mkdir C:\empty'


sshpass -p 'myn888' ssh xwjf@100.105.23.114 'cmd /c "robocopy C:\empty C:\Users\XWJF\.openclaw /MIR /NFL /NDL /NJH /NJS"'


sshpass -p 'myn888' ssh xwjf@100.105.23.114 'cmd /c "rmdir C:\Users\XWJF\.openclaw"'


sshpass -p 'myn888' ssh xwjf@100.105.23.114 'cmd /c "rmdir C:\empty"'


搞定！确认一下：

sshpass -p 'myn888' ssh xwjf@100.105.23.114 'cmd /c "dir C:\Users\XWJF\.openclaw 2>&1"'


Output:
Volume in drive C is Windows-SSD
 Volume Serial Number is 885E-6952

 Directory of C:\Users\XWJF

File Not Found


`.openclaw` 文件夹已删除 ✅


可以很棒，现在你搜一下能不能扫码电脑磁盘大文件相关的技能，我现在很需要腾出空间


Explanation: 用户想要扫描电脑磁盘找大文件，腾出空间。让我搜索相关技能。

用户想要扫描电脑磁盘找大文件，腾出空间。让我搜索相关技能。